Most Yoclez e-bikes arrive approximately 85% assembled. The front wheel, pedals, saddle, rear rack, and handlebar may require fitting. Always use the manual supplied with your exact model as the primary instruction.
Before you begin
- Work on a clean, stable surface and keep all packaging until setup is complete.
- Check the carton for the bike, charger, keys, pedals, tools, manual, and model-specific accessories.
- Do not power on or charge a visibly damaged battery. Contact support first.
General setup checklist
- Secure the handlebar and align it with the front wheel.
- Install the front wheel in the correct direction and check that the axle is fully seated.
- Fit the left and right pedals on their matching sides; the left pedal uses a reverse thread.
- Insert and secure the saddle at a safe height without exceeding the minimum-insertion mark.
- Fit the rear rack and any supplied accessories using the model manual.
- Check both brakes, tyre pressure, lights, display, cables, and fasteners before riding.
- Charge the battery with the supplied charger in a dry, ventilated area.
Need help?
Send your order number, model, and clear photos of the part you are fitting to cs@yoclez.co.uk. Do not ride until steering, wheels, brakes, and pedals are secure.